UHMWPE sheet, FDA  standard UHMWPE plastic sheet, anti wear UHMWPE strip
UHMWPE sheet, FDA standard UHMWPE plastic sheet, anti wear UHMWPE strip
Update: 2019-8-31      
UHMWPE sheets will not encourage growth of bacteria or fungus, is self-lubricating, and it meets FDA requirements for direct food contact. It also meets USDA requirements in specific applications.
Custom cut to your exact specifications
Xinxing specializes in UHMWPE and fabrication of industrial plastic sheets, rods and tubing
UHMWPE sheets resemble other polyethylenes in superficial characteristics such as texture, color, stiffness, weight and general appearance, but UHMWPE is superior in physical and mechanical strength
Standard Virgin UHMWPE sheet, reprocessed UHMWPE, oil-filled UHMWPE, and other grades.
Ultra High Molecular Weight Polyethylene is an extremely high abrasion resistant material. The molecular weights range between 3.1 to 5.67 million.

Ultra-High Molecular Weight Polyethylene (UHMW-PE) 
UHMW-PE is defined as polyethylene whose molecular weight is 3.1 million or higher. When making this determination, it was found that physical properties increased rapidly as lower MW values increased, and then leveled off at the 3,100,000 value. As with most high-performance polymers, processing of UHMW-PE is not easy. Because of its high melt viscosity, conventional molding and extrusion processes would break the long molecular chains that give the material its excellent properties. Current manufacturing methods include compression molding, ram extrusion and warm forging of extruded slugs. UHMW-PE has outstanding abrasion resistance and an extremely low coefficient of friction. Impact strength is high and chemical resistance is excellent. 
The material does not break in impact strength tests using standard notched specimens; double-notched specimens break at 20 ft-lb/in (42.1 kJ/m2). UHMW-PE has a crystalline melting point of 267°F (131°C). Recommended maximum service is about 200°F (93°C). Care should be taken when fastening UHMW-PE, as its large thermal expansion can cause the material to buckle between fasteners if they are too far apart. 

Conveyor wear strips
Snowmobile track sprockets
Guide rails
Paper machine suction box covers

Parts of textile looms

Chute linings
Pipe for distribution of slurry materials
Other components requiring maximum abrasion 
resistance and impact strength and a low friction coefficient

+86 182 6303 6307
Copyright © Shandong Ningjin Xinxing Chemical Co.,ltd All Rights Reserved.