Polyethylene PE1000 2000 UHMW PE Sheet

Free sample available!

Ultra High Molecular Weight Polyethylene (UHMWPE) Sheet

As the big thermoplastic sheet manufacturer in China, Xinxing supplies Natural, Single and Dual(double) Colors UHMWPE/HMWPE Sheet (plate, board, panel) for meeting market requirement. Xinxing has the most advanced Compression Molded and Extruding Machines to produce high quality UHMWPE/HMWPE sheet with composite material under the certain pressure and temperature.

Ultra-high-molecular-weight polyethylene (UHMWPE, UHMW) is a subset of the thermoplastic polyethylene. Also known as high-molecular weight polyethylene, (HMWPE), it has extremely long chains, with a molecular mass usually between 3.5 and 7.5 million amu. The longer chain serves to transfer load more effectively to the polymer backbone by strengthening intermolecular interactions. This results in a very tough material, with the highest impact strength of any thermoplastic presently made.

UHMWPE is odorless, tasteless, and nontoxic. It embodies all the characteristics of high-density polyethylene (HDPE) with the added traits of being resistant to concentrated acids and alkalis, as well as numerous organic solvents. It is highly resistant to corrosive chemicals; has extremely low moisture absorption and a very low coefficient of friction; is self-lubricating (see boundary lubrication); and is highly resistant to abrasion, in some forms being 15 times more resistant to abrasion than carbon steel. Its coefficient of friction is significantly lower than that of nylon and acetal and is comparable to that of polytetrafluoroethylene (PTFE, Teflon), but UHMWPE has better abrasion resistance than PTFE.

· abrasion resistance 

· antiadshesiveness 

· stiffness (modulus of elasticity eg for PE500 1000 MPa instead of 800 MPa for PE300) 

· lubricating properties 

· resistance to scoring, grooving 

· water absorption 

· coefficient of friction 

· high capacity to prevent sticking of materials 

· self-lubricating ability 

· radiation resistance 

· ease of processing 

· high surface resistance 

· notched impact strength (up to DIN EN ISO 179 PE300 – 12 kJ/m2, PE500 – 50 kJ/m2, PE 1000 – 200kJ/m2) 

· application temperature range (in °C respectively for PE300 –50~+80, PE500 -100~+80, PE1000 -260~+80) 

· damping

3 TYPES OF UHMW PE 1000 2000 SHEET FOR CHOOSING

partitioning tables, countertops and chopping boards PE, butcher blocks, logs in the meat industry (slaughterhouses, butchers, butcher shops, shops of meat processing, poultry, fish) and food 

fenders, fender moldings, protective and sliding for ships and boats in ports, shipyards 

gears, machine parts and components, self-lubricating gears, guides, slides, bearing housings, plain sleeves

doors in factories, cold stores, refrigerators , rubbing strips 

sieves, colanders, presses (eg paper industry)

undercoats for core cutters 

sprockets, guides 

canning lines and bottlers elements of the lines of bottling, sorting, packaging and packing 

lining of chutes, ramps, bleed, hold, transfer stations (sand, coal, grain and other bulk materials), silos, wagons, truck trailers 

bulk materials industry 

paper, printing, textile industry 

chemically resistant pump components (casings, impellers), fans, filters 

sporting articles for use in water 

Plastic bearings

HDPE Engraving Board	Composite Ground Mat	Composite Outrigger Pad	Dasher Board for Rink