close
Choose Your Site
Global
 |
| Type: | UHMWPE |
|---|---|
| Application: | Guide,Convery Liner,Defender |
| Certification: | ISO9001: 2000 |
| Condition: | New |
| Material: | UHMWPE |
| Density: | 0.935g/Cm³ |
| Quantity: | |
|---|---|
UL-001
Xinxing
Advantages of UHMWPE truck liners
UHMWPE sheet with continuous length, seamless dump body liners release sticky materials such as clay, coal fly ash or fertilizer in the very best and very worst conditions, eliminating costly flow agents, reducing labor costs and increasing the number of loads hauled each day.
• Provides steady release of bulk materials
• Weighs less than aluminum or steel
• Abrasion, corrosion and chemical-resistant
• Economically priced
• High impact strength
Application of UHMWPE sheet wear liners
⇒ Fender panel facing pads
⇒ Fender pile rubbing strips
⇒ UE-V fender shields
⇒ Facing strips for jetties and wharves
⇒ Lock entrance and lock wall protection
⇒ Mitres on lock gates
⇒ Bridge buttress protection
⇒ Pontoon pile guide bearings
⇒ Fast-launch lifeboat slipways
⇒ Beltings for smaller workboats
Features of UHMWPE Sheets and Components:
· Very Low Co-efficient of Friction
· High Impact Strength, will not break or shatter
· High Abrasion Resistance
· Zero Water Absorption
· Chemical Inert, Works with almost all chemical including HCL
· Survive in Freezing Conditions from ( -200 Degree C to 80 Degree C )
· Anti Sticking Property· Self Lubricated Material
Technical data of UHMWPE sheet:
| Project Name | Unit | Test Method | Test Result |
| Density | g/cm3 | ASTM D-1505 | 0.94-0.98 |
| Compressive Strength | Mpa | ASTM D-638 | ≥42 |
| Water Absorption | % | ASTM D-570 | <0.01 |
| Impact Strength | KJ/m2 | ASTM D-256 | ≥140 |
| Heat Distortion Temperature | ºC | ASTM D-648 | 85 |
| Shore Hardness | Shore D | ASTM D-2240 | >40 |
| Friction Coefficient | ASTM D-1894 | 0.11-0.17 |
Parameter of UHMWPE sheet:
| Items | Unit | Data | ASTM Test Method |
| Molecular Weight | billion | 3~9 | D2857 |
| Specific Gravity | g/cm^3 | 0.935~1.0 | D1505 |
| Tensile Strength | MPa | 40~45 | D638 |
| Elongation at break | % | 300~400 | D638 |
| Impact Strength | kJ/m^2 | ≥140 | D250 |
| Rockwell Hardness | kJ/m^3 | 40~60 | D747 |
| Abrasion Loss | mg/1000 times | 70 | D1175 |
| Distortion Temperature | ºC | 85 | D648 |
Application Field
1. Lining: Silos, hoppers, wear-resistant plates, brackets, chute like reflux devices, sliding surface, roller, etc.
2. Food Machinery: Guard rail, star wheels, guide gear, roller wheels, bearing lining tile, etc.
3. Paper-making machine: Water lid plate, deflector plate, wiper plate, hydrofoils.
4. Chemical Engineering: Corrosion and wear-resistant mechanical parts
5. Other: Agricultural machinery, ship parts, electroplating industry, extreme low temperature mechanical components.
6. Thermal power: coal handling, storage of coal, coal bunker lining
7. Coal processing: sieve plate, filter, U-underground coal chute
8. Concrete: cement raw and finished product silo silo lining
9. Grain: food storage or chute lining
10. Mining: sieve plate, chute linings, wearproof anti-bonding part
11. Some kind of rubber fender panels and front face of rubber fender
12. Other fields include Ice rink, water tank etc.
As a new type of engineering plastic, UHMWPE sheet possesses multiple performance advantages:
Extraordinary wear-resistant,4~6 times higher than other plastic,6~9 times higher than steel, and 26 times higher than copper.
Highly impact strength, 10 times higher than PA6 and PP
Low friction coefficient (0.05~0.11), and capable of self lubrication
Unattractive to foreign material, and anti-sticking while sliding
Resistant to chemical corrosion
Packaging
1. pallet with carton.
2. Plastic pallet with carton.
3. wooden pallet with wooden case.
4. According to customer requirements.
Advantages of UHMWPE truck liners
UHMWPE sheet with continuous length, seamless dump body liners release sticky materials such as clay, coal fly ash or fertilizer in the very best and very worst conditions, eliminating costly flow agents, reducing labor costs and increasing the number of loads hauled each day.
• Provides steady release of bulk materials
• Weighs less than aluminum or steel
• Abrasion, corrosion and chemical-resistant
• Economically priced
• High impact strength
Application of UHMWPE sheet wear liners
⇒ Fender panel facing pads
⇒ Fender pile rubbing strips
⇒ UE-V fender shields
⇒ Facing strips for jetties and wharves
⇒ Lock entrance and lock wall protection
⇒ Mitres on lock gates
⇒ Bridge buttress protection
⇒ Pontoon pile guide bearings
⇒ Fast-launch lifeboat slipways
⇒ Beltings for smaller workboats
Features of UHMWPE Sheets and Components:
· Very Low Co-efficient of Friction
· High Impact Strength, will not break or shatter
· High Abrasion Resistance
· Zero Water Absorption
· Chemical Inert, Works with almost all chemical including HCL
· Survive in Freezing Conditions from ( -200 Degree C to 80 Degree C )
· Anti Sticking Property· Self Lubricated Material
Technical data of UHMWPE sheet:
| Project Name | Unit | Test Method | Test Result |
| Density | g/cm3 | ASTM D-1505 | 0.94-0.98 |
| Compressive Strength | Mpa | ASTM D-638 | ≥42 |
| Water Absorption | % | ASTM D-570 | <0.01 |
| Impact Strength | KJ/m2 | ASTM D-256 | ≥140 |
| Heat Distortion Temperature | ºC | ASTM D-648 | 85 |
| Shore Hardness | Shore D | ASTM D-2240 | >40 |
| Friction Coefficient | ASTM D-1894 | 0.11-0.17 |
Parameter of UHMWPE sheet:
| Items | Unit | Data | ASTM Test Method |
| Molecular Weight | billion | 3~9 | D2857 |
| Specific Gravity | g/cm^3 | 0.935~1.0 | D1505 |
| Tensile Strength | MPa | 40~45 | D638 |
| Elongation at break | % | 300~400 | D638 |
| Impact Strength | kJ/m^2 | ≥140 | D250 |
| Rockwell Hardness | kJ/m^3 | 40~60 | D747 |
| Abrasion Loss | mg/1000 times | 70 | D1175 |
| Distortion Temperature | ºC | 85 | D648 |
Application Field
1. Lining: Silos, hoppers, wear-resistant plates, brackets, chute like reflux devices, sliding surface, roller, etc.
2. Food Machinery: Guard rail, star wheels, guide gear, roller wheels, bearing lining tile, etc.
3. Paper-making machine: Water lid plate, deflector plate, wiper plate, hydrofoils.
4. Chemical Engineering: Corrosion and wear-resistant mechanical parts
5. Other: Agricultural machinery, ship parts, electroplating industry, extreme low temperature mechanical components.
6. Thermal power: coal handling, storage of coal, coal bunker lining
7. Coal processing: sieve plate, filter, U-underground coal chute
8. Concrete: cement raw and finished product silo silo lining
9. Grain: food storage or chute lining
10. Mining: sieve plate, chute linings, wearproof anti-bonding part
11. Some kind of rubber fender panels and front face of rubber fender
12. Other fields include Ice rink, water tank etc.
As a new type of engineering plastic, UHMWPE sheet possesses multiple performance advantages:
Extraordinary wear-resistant,4~6 times higher than other plastic,6~9 times higher than steel, and 26 times higher than copper.
Highly impact strength, 10 times higher than PA6 and PP
Low friction coefficient (0.05~0.11), and capable of self lubrication
Unattractive to foreign material, and anti-sticking while sliding
Resistant to chemical corrosion
Packaging
1. pallet with carton.
2. Plastic pallet with carton.
3. wooden pallet with wooden case.
4. According to customer requirements.
