close
Choose Your Site
Global
 |
Yellow UHMWPE OR HDPE round bar | HDPE rod| HDPE square bar is a kind of plastic rod. The product is non-toxic and tasteless. The density is 0.96 g / cm3. Tensile strength and properties are better than low density polyethylene; wear resistance, electrical insulation, toughness and cold resistance are all good, insoluble in any organic solvents at room temperature, acid, alkali and various salt corrosion resistance .
| Quantity: | |
|---|---|
HDPE ROD001
XINXING
Yellow UHMWPE OR HDPE round bar | HDPE rod| HDPE square bar is a kind of plastic rod. The product is non-toxic and tasteless. The density is 0.96 g / cm3. Tensile strength and properties are better than low density polyethylene; wear resistance, electrical insulation, toughness and cold resistance are all good, insoluble in any organic solvents at room temperature, acid, alkali and various salt corrosion resistance
Properties of HDPE ROD :
Propertise | Unit | Result |
Density | g/cm3 | 0.96 |
Max Continuous Operating Temp: | ℃ | 90 |
Max Short Term Operating Temp: | ℃ | 110 |
Flexural Strength | MPa | 21.3 |
Flexural Modulus | MPa | 837 |
Charpy Notched Impact Strength | kJ/m2 | 35 |
Tensile Modulus | MPa | 851 |
Tensile Strength | MPa | 24.8 |
Nominal Tensile Strain at Break | % | 630 |
Izod Notched Impact Strength | KJ/m2 | 33 |
Size of Yellow UHMWPE OR HDPE round bar | HDPE rod| HDPE square bar
Diameter: From 10mm to 500mm
Color:Natural, green, white, yellow, blue, black , red
Length:500mm, 1000mm,2000mm,3000mm
High density polyethylene (HDPE rods) have outstanding abrasion resistance, low friction factor and self-lubrication; excellent stress crack resistance, high temperature creep resistance and low temperature resistance (applicable even at -270 ° C); excellent stretching Strength, extremely high impact strength, and does not decrease at low temperatures; good noise damping; at the same time, excellent chemical stability and fatigue resistance; no surface adsorption, excellent electrical insulation performance; non-toxic, etc. performance. High-density polyethylene HDPE rods have good electrical properties, especially high insulation dielectric strength, and are the most insulating plastics.
HDPE 300 rods Application:
Widely used in chemical industry, machinery, chemical medical equipment parts, seals, cutting boards, sliding profiles. Used in chemical, machinery, chemical, power, clothing, packaging, food and other industries.
Yellow UHMWPE OR HDPE round bar | HDPE rod| HDPE square bar is a kind of plastic rod. The product is non-toxic and tasteless. The density is 0.96 g / cm3. Tensile strength and properties are better than low density polyethylene; wear resistance, electrical insulation, toughness and cold resistance are all good, insoluble in any organic solvents at room temperature, acid, alkali and various salt corrosion resistance
Properties of HDPE ROD :
Propertise | Unit | Result |
Density | g/cm3 | 0.96 |
Max Continuous Operating Temp: | ℃ | 90 |
Max Short Term Operating Temp: | ℃ | 110 |
Flexural Strength | MPa | 21.3 |
Flexural Modulus | MPa | 837 |
Charpy Notched Impact Strength | kJ/m2 | 35 |
Tensile Modulus | MPa | 851 |
Tensile Strength | MPa | 24.8 |
Nominal Tensile Strain at Break | % | 630 |
Izod Notched Impact Strength | KJ/m2 | 33 |
Size of Yellow UHMWPE OR HDPE round bar | HDPE rod| HDPE square bar
Diameter: From 10mm to 500mm
Color:Natural, green, white, yellow, blue, black , red
Length:500mm, 1000mm,2000mm,3000mm
High density polyethylene (HDPE rods) have outstanding abrasion resistance, low friction factor and self-lubrication; excellent stress crack resistance, high temperature creep resistance and low temperature resistance (applicable even at -270 ° C); excellent stretching Strength, extremely high impact strength, and does not decrease at low temperatures; good noise damping; at the same time, excellent chemical stability and fatigue resistance; no surface adsorption, excellent electrical insulation performance; non-toxic, etc. performance. High-density polyethylene HDPE rods have good electrical properties, especially high insulation dielectric strength, and are the most insulating plastics.
HDPE 300 rods Application:
Widely used in chemical industry, machinery, chemical medical equipment parts, seals, cutting boards, sliding profiles. Used in chemical, machinery, chemical, power, clothing, packaging, food and other industries.
